Nexol NEX R1 – generate hot water directly with photovoltaic power
The Nexol NEX R1 is a plug-and-play retrofit system for the direct use of photovoltaic power for hot water preparation. The system consists of a screw-in heating element and an intelligent energy controller with touch display. It is suitable for compatible hot water and buffer tanks with a free 1 1/2-inch screw-in socket.
The direct current generated by the connected PV modules is used directly to heat the tank water. A separate inverter is not required for this operating mode. If the PV output is insufficient, the NEX R1 can additionally heat via the 230-volt mains connection.
Stepless power control with MPP tracking
The energy controller continuously adjusts the heating output to the currently available solar power. The integrated MPP tracking determines the optimal operating point of the connected PV module string, thereby supporting the best possible use of the available solar energy.
The maximum heating output is 1.5 kW. For the PV input, a rated voltage of at least 100 V is intended. The maximum PV open-circuit voltage is 300 V, and the maximum permissible PV short-circuit current is 15 A. Systems with a PV output of up to approximately 2,500 Wp are recommended as suitable.
Operation and demand-based grid backup heating
Operation is carried out via the controller's integrated touch display. Operating parameters and target temperatures can be adapted to the respective storage system and the desired hot water demand.
PV energy is used primarily for water heating. If the current solar output is insufficient, the optional grid backup heating can supplement hot water preparation via the connection with 230 V and 50–60 Hz. This makes it possible to combine solar self-consumption with demand-based hot water supply.
For storage tanks up to 300 liters
The NEX R1 is intended for suitable hot water and buffer storage tanks with a volume of up to 300 liters. The screw-in heating element has a connection thread of 1 1/2 inches and a heating rod length of 350 mm. The overall dimensions of the heating element are 89 × 89 × 500 mm.
Before installation, the connection thread, installation length, and the available interior space of the storage tank must be checked. When installed, the heating element must not collide with heat exchangers, thermowells, anodes, or the storage tank wall.
Technical data
| Model | Nexol NEX R1 |
| Heating output | 1.5 kW |
| Heating rod length | 350 mm |
| Heater dimensions | 89 × 89 × 500 mm |
| Connection thread | 1 1/2 inch |
| Maximum tank volume | 300 liters |
| Recommended PV output | up to 2,500 Wp |
| PV nominal voltage | from 100 V |
| Maximum PV open-circuit voltage | 300 V |
| Maximum PV short-circuit current | 15 A |
| Mains connection | 230 V / 50–60 Hz |
| Protection rating of heating element | IP65 |
| Protection rating of controller | IP21 |
| Maximum operating temperature | 80 °C |
| Maximum operating pressure | 10 bar |
| MPP tracking | Yes |
| Operation | Touch display |
| Origin | Made in Germany |
Installation
Mechanical installation on the storage tank as well as connection to mains voltage, PV DC voltage, and protective conductor must be carried out by appropriately qualified specialist personnel. The storage tank must be completely filled and vented before electrical connection.
The screw-in heating element may only be operated when the heating elements are completely surrounded by water. Dry operation can damage the heating element and poses a safety risk.
Important planning notes
Before installation, the technical limit values of the PV module string must be compared with the input data of the controller. The maximum PV open-circuit voltage of 300 V and the maximum short-circuit current of 15 A must not be exceeded even under unfavorable temperature and irradiance conditions.
The suitability of the storage tank must be checked based on connection size, installation length, operating pressure, operating temperature, and available interior space. The NEX R1 supplements an existing hot water system and does not replace professional system planning.
Scope of delivery
- Nexol NEX R1 energy controller with touch display
- AC/DC screw-in heating element with 1 1/2-inch connection thread
- Mains connection cable with protective contact plug
- Prepared connection cables for system operation