Product Overview & Application
The SELFA heating element Incoloy 825 2 kW is an electric screw-in heating element for direct hot water preparation in suitable open and closed hot water tanks. It is suitable for electric supplementary or post-heating in water-bearing containers when the heating element is fully submerged during operation.
The 2.0 kW version is intended for hot water tanks and suitable containers with a minimum volume of 80 liters. Depending on the selected version, the heating element can be installed with a head thread of G 1 1/4 or G 1 1/2.
Technology & Equipment
Heat is generated via tubular heating elements that operate at 230 V AC and 50 Hz. In this version, the heating elements are made of Incoloy 825. The connection cover contains the thermostat controller and indicator light, allowing the desired water temperature to be set continuously.
The equipment includes a non-automatic temperature limiter as overheating protection. The hexagonal flange allows proper screwing into the matching tank socket with suitable tools.
Everyday Benefits
The heating element enables direct electric heating of the tank water and can be used as a simple supplementary heating in suitable hot water tanks. The integrated thermostat allows the target temperature to be set on the device, while the temperature limiter interrupts the circuit in case of inadmissible overheating.
The screw-in heating element design is particularly suitable for tanks that already have a matching threaded socket. For safe operation, full water coverage, permissible installation position, and the technical operating limits must be observed.
System Integration & Compatibility
The SELFA heating element 230 V Incoloy 825 is intended for hot water tanks and suitable water-bearing vessels. It can also be used in stainless steel tanks, provided that the thread, installation position, operating pressure, and complete water coverage match the design.
For the 2.0 kW version, the installation length is 305 mm. The S dimension according to the dimension drawing is 60 mm. The heating elements must not touch the tank walls; the minimum distance to the tank walls is 30 mm.
Technical data at a glance
The most important technical data of the 2.0 kW version at a glance.
| Device type |
Screw-in heating element / heating cartridge |
| Rated power |
2.0 kW |
| Voltage |
230 V~ |
| Frequency |
50 Hz |
| Connection size |
G 1 1/4 or G 1 1/2 depending on version |
| Material |
Incoloy 825 |
| Max. operating pressure |
10 bar |
Installation
The heating element may be installed horizontally or vertically from below. Other installation positions are not permitted for this version. Before electrical commissioning, the tank must be filled, the screw connection must be tight, and the entire heating element must be fully immersed.
Installation and electrical connection must be carried out by qualified personnel. The tank must be operated with suitable safety devices, in particular an appropriate safety valve.
Notes
The heating element may only be operated as intended in suitable water-bearing tanks. Dry running, incomplete immersion, and operation in heavily contaminated water or unsuitable media are not permitted.
Deposits on the heating elements must not be removed mechanically. Suitable descalers or citric acid may be used for descaling in accordance with the respective product instructions.
Scope of delivery
- 1 x SELFA heating element / heating cartridge 230 V, Incoloy 825, 2.0 kW, in the selected thread and thermostat version