Product Overview & Application Area
The ATTACK SLX 25 COMBI Pellet is a water-cooled combination boiler for firewood and wood pellets. The 25SLXCP version operates in wood gasification mode with a rated output of 25 kW and in automatic pellet mode with 30 kW. This makes the boiler suitable for central heating systems in which the user switches between manually fed firewood and automatic pellet operation.
The boiler output must be matched to the building's heating load. For wood operation, integration into a buffer storage tank is intended; for this version, a model-specific buffer volume of 2,000 liters is specified.
Technology & Equipment
In wood mode, the boiler operates on the wood gasification principle with an induced draught fan and PROFI/PID control. The 200-liter loading chamber accommodates firewood up to 650 mm in length. The tube heat exchanger is equipped with turbulators and a mechanical cleaning lever.
For pellet operation, the ATTACK PELLET BURNER Automatic 8–30 kW is swung into the operating position. The burner features electric ignition and automatic grate cleaning. Fuel is supplied from an external pellet container via a feed screw; these components are separate accessories.
Everyday Advantages
The fuel can be selected based on availability and the desired operating convenience: firewood enables classic manual operation, while pellets allow for largely automated heating operation. In wood operation, the large loading chamber reduces the number of refueling cycles; the burn duration at rated output is approximately 7.2 hours.
Automatic ignition and grate cleaning reduce manual operating effort in pellet mode. For maintenance and cleaning, the heat exchangers, turbulators and burner are designed to be accessible.
System integration & compatibility
The boiler has heating connections G 6/4 and a flue pipe connection with a diameter of 150 mm. For low-corrosion operation, the return temperature must be at least 65 °C; the integration is therefore carried out with a suitable return-flow temperature raising system. The heating water temperature range is 65 to 90 °C.
An external pellet container and a feed screw are required for pellet operation. The integrated post-cooling circuit is intended for connecting a thermal discharge safety device. The chimney must ensure a draft of 23 Pa.
Technical data at a glance
| Manufacturer / model |
ATTACK / SLX 25 COMBI Pellet |
| MPN |
25SLXCP |
| Fuel |
Firewood / wood pellets |
| Rated output wood |
25 kW |
| Rated output pellets |
30 kW |
| Output range wood |
12.5–25 kW |
| Output range pellets |
8–30 kW |
| Boiler efficiency |
Wood 91.6% / Pellets 90.5% |
| Energy efficiency class |
A+ |
| Boiler class |
5 |
| Loading chamber volume |
200 l |
| Filling opening |
235 × 445 mm |
| Max. log length |
650 mm |
| Fuel consumption |
Wood 7.8 kg/h / Pellets 2.4–6.9 kg/h |
| Water content |
117 l |
| Recommended buffer volume |
2,000 l in wood mode, model-specific specification |
| Min. return temperature |
65 °C |
| Heating water temperature |
65–90 °C |
| Max. operating pressure |
2.5 bar |
| Chimney draft |
23 Pa |
| Flue pipe connection |
150 mm |
| Heating connection |
G 6/4 (1 1/2 inch) |
| Dimensions H × W × D |
1,472 × 703 × 1,650 mm, depth with burner |
| Weight |
610 kg |
| Electrical connection |
230 V / 50 Hz |
| Electrical power consumption |
Wood 42 W / Pellets 160 W / Ignition 600 W / Standby < 5 W |
| Protection class |
IP20 |
| Max. noise level |
65 dB |
Installation
Installation, hydraulic integration, chimney connection and electrical connection must be carried out by qualified specialist personnel. The system requires a suitable return-flow temperature raising that ensures a return temperature of at least 65 °C. Safety valve, venting and thermal discharge safety device on the cooling circuit must be properly integrated.
Notes
Wood and pellets must not be burned at the same time. For split logs, dry wood with 12–20 % moisture content is intended; pellets must meet the quality and dimension requirements specified for the burner. In pellet mode, the primary and secondary air flaps must be closed.
Pellet container and feed screw are not part of the basic item. The specific system planning, buffer sizing and chimney dimensioning must be coordinated with the building and the heating system.
Scope of delivery
ATTACK SLX 25 COMBI Pellet combination boiler 25SLXCP with ATTACK PELLET BURNER Automatic 8–30 kW pellet burner and PROFI/PID boiler control.