ATMOS PX20 pellet boiler (eligible for funding)

ATMOS PELLET BOILER – PX series

Information regarding funding!

The Atmos PX series is eligible for subsidies from 15 kW without a particle separator. The 10 kW boiler is only eligible with a particle separator.

For this reason, we only offer the eligible versions without a particle separator online. (The exception is the 10 kW PX, which includes a particle separator to ensure eligibility for funding.)

Should you prefer the version with a particle separator, please contact us and we will create a customized offer for you.

Request a quote

ATMOS PX20 pellet boiler (eligible for funding)

The PX15 and the PX20 They have an integrated storage container with a capacity of approximately 175 liters in the upper section. The operator intends to refill this silo with pellets from bags every 3 to 5 days, which is not a problem given the filling height of around 1.4 meters. Additionally, there is also the option of using the ATMOS The BasicOne suction station can be mounted on the silo, eliminating the need for manual refilling. This allows the integrated silo to be automatically filled from a main storage facility located up to 15 meters away.

From the integrated silo, an internal screw conveyor transports and doses the pellets to the unit mounted at the bottom front. ATMOS A25PX Pellet BurnerThis model differs in several details from the A25 pellet burners otherwise used and manufactured by Atmos since 2010. For example, the filling pipe is straight and not angled as usual, and the software also differs from the standard version in several basic parameters. Otherwise, however, the pellet burner is configured identically to the other A25, A25GSP, A45, and A85 burners. This is a major advantage offered by Atmos, as the installer is immediately familiar with any of our burners once they have worked with just one. Since March, the new ATMOS PX10 and ATMOS PX25 have also been available. The smaller PX10 has a maximum output of 10 kW, and the PX25 has 24 kW. Both of these pellet boilers are also eligible for BAFA (Federal Office for Economic Affairs and Export Control) funding. Funding is available if a buffer storage tank with a minimum capacity of 30 liters per kW of boiler output is installed at the same time. The new BAFA funding program for 2020 subsidizes the installation of new pellet heating systems by up to 45%.

equipment && Features

ATMOS PELLET BOILER – PX series

• Space-saving boiler design
• compact design with a width of only 59 or 68 cm
• Boiler made of high-quality 6 mm boiler steel
• with external heat exchanger cleaning
• The pellet boilers of the PX series are fully insulated, including the back wall.
• Thermal insulation with mineral wool insulation
• large integrated pellet storage tank
• compact boiler design
• Can be combined with Basic One intake
• Optional: weather-compensated control for 1 or 2 mixing circuits, 1 hot water and solar.
• best emission values
• user-friendly and quick boiler cleaning
• Recommendation: Buffer management module for optimal buffer charging in pellet operation
• 5 instead of 2 year warranty on boiler body when simultaneously purchasing and using a Laddomat
• TÜV-certified according to DIN-EN303-5
• BAFA eligible for funding

To combat rising energy costs One can counteract this trend, naturally also considering the finite nature of fossil fuels, climate change, and environmental protection. Many people are looking for an alternative to their existing oil or gas heating system.Especially if they are already required to consider an alternative due to mandatory replacement of boilers over 30 years old. There are solutions that produce less CO2, are less dependent on fluctuating prices, and offer no loss of comfort. The pellet heating system meets these requirements very successfully!

Technical data

• Energy efficiency class A+
  
• Boiler class 5
  
• Nominal heat output 20 kW
  
• Power range 4.8 - 21.9 kW
  
• Efficiency 91.5%
  
• Traction requirement 16 Pa
  
• Prescribed fuel: pellets
  
• Exhaust gas temperature 142 °C
  
• Exhaust gas mass flow 0.015 kg/s
  
• Height 1411 mm
  
• Width 674 mm
  
• Depth 1447 mm
  
• Flue pipe connection 150/152 mm
  
• Flue pipe outlet 1213 mm
  
• Weight 345.0 kg

Scope of delivery

• Pellet boiler Atmos PX 20 kW
• Assembly && User manual